Gate
Installation
Melbourne
Custom, Swimming & Sliding Gates Designed & Installed by Me — Ari
Get your free quote
Hey, I’m Ari, the owner-operator at Easy Love Fencing.
Gates are all about safety, security, privacy, access, and convenience. I don’t just send a team — I inspect, measure, recommend, and install the gates myself to make sure everything fits properly and works exactly how you need it.
We work with:
Planning your budget? Read our guide: How Much Does a Custom Gate Cost in Melbourne?.
- Custom Gates
- Sliding Gates
- Swimming Gates
“With Easy Love Fencing, you deal directly with me — the owner and installer — from the first visit to the final hinge. No sales team, no confusion, just someone who actually builds it.”
Gate Installation Melbourne: Every Gate Type We Fit
Houses, townhouses, estates and commercial sites. Pick the gate that sounds closest to what you need and see the full details on its own page.
Custom Gate Design & Fabrication
Made-to-measure gates in timber, steel, aluminium or mixed materials, designed around your home and driveway.
Sliding Gate Installation
Track or cantilever gates that glide sideways. Ideal when there is no room for a swing.
Automatic Gate Installation
Motorised gates with remotes and safety sensors for easy, secure vehicle access.
Swing Gate Installation
Classic single or double gates that open on strong, reliable hinges.
Driveway Gate Installation
Wide gates for daily vehicle use, with the right posts, footings and hardware.
Colorbond Gate Installation
Tough Colorbond steel gates that match your fence and handle Melbourne weather.
Pool Safety Gate Installation
Self-closing, self-latching gates built to suit Victorian pool-barrier requirements.
Gate Repair & Maintenance
Fixes for sagging, sticking or misaligned gates, tracks, hinges, latches and motors.
Not sure which gate suits your property?Ari measures up and recommends the right option. The site measure is free.
Book Site MeasureHow to Choose the Right Gate for Your Property
Most people pick a gate by looks first. That is fair, but three practical questions usually decide which gate will actually work for you.
1. Space and driveway layout
A swing gate needs clear room to open. If your driveway is short, sloping or close to the street, a sliding gate often suits better because it moves sideways. Ari checks the space before he recommends anything.
2. Security and privacy
Solid slat or steel gates give you privacy and a stronger barrier. Open-style gates let light through and keep the street view. Good locks and latches matter as much as the gate panel.
3. Manual or automatic
Automatic gates are great for daily driveway use, but they cost more and need power. Not ready yet? We can prepare space for a motor so you can automate later.
Gate types compared
| Gate type | Space needed | Automation-ready | Privacy / security | Best for |
|---|---|---|---|---|
| Swing | Clear arc to open | ✅ Yes | Good to high | Flat driveways with space |
| Sliding | Clear fence run beside the opening | ✅ Yes | High | Short or sloping driveways |
| Automatic | Depends on gate type, plus power | ✅ Built in | High | Daily vehicle access |
| Pool safety | Standard pedestrian opening | ❌ No | Child-safety focused | Pool and spa barriers |
| Custom | Designed to suit the site | ✅ Optional | As designed | Corner lots and feature entries |
Swipe sideways on mobile to see the full table.
Five questions to ask any gate installer
At Easy Love Fencing, the answer to all five is yes.
Get Free Quote- Will the person who measures also install the gate?
- Are they fully insured, with a structural warranty?
- Do you get a written quote that says what is included?
- Can they match the gate to your existing fence?
- Do they also repair gates later?
Gate Installation Melbourne Cost: What Changes the Price?
We would rather be upfront than give you a number that changes later. No two gates are the same, so a fair price comes from the details of your property.
Size and width
A single pedestrian gate costs less than a wide double or sliding driveway gate.
Material and finish
Timber, Colorbond, aluminium and custom steel each price differently, as do powder-coat and paint finishes.
Gate type
Sliding gates need tracks or a cantilever system, which adds to the job. Swing gates are usually simpler.
Automation
Motors, safety sensors and remotes add cost, plus the power connection by a licensed electrician.
Posts, footings and access
Sloping ground, rock or tight access can change how much work the install involves.
Removing an old gate
Taking out and replacing an existing gate is included in your quote, so there are no surprises.
Get a clear, written quote before any work starts
Ari measures on site and lists exactly what is included, so you know the full cost up front.
Gate Materials and Finishes That Suit Melbourne
Melbourne can give you a hot, dry afternoon and a wet, windy night on the same day. Your gate needs a material and finish that can handle both.
Colorbond steel
Strong, low-maintenance and available in a wide range of colours, so it is easy to match to a Colorbond fence.
Powder-coated steel
Very secure and ideal for custom designs. The paint finish life depends on the coating and conditions, typically around 5 to 10 years before it needs attention.
Aluminium
Lightweight and naturally resistant to rust, which makes it a good choice for pool gates and for sliding gates that move every day.
Timber
Warm and natural, and easy to match to a timber fence. It needs regular re-coating to stay looking good and to resist the weather.
Coastal suburbs and exposed sites usually benefit from aluminium or a well-protected steel finish. Not sure which to pick? Ask Ari at your free site measure.
Our Gate Installation Process in Melbourne
You deal with Ari at every stage, so nothing gets lost between a salesperson and a tradesperson.
You get in touch
Call Ari or use the quote form. Tell us your suburb, the gate you have in mind and any deadlines.
Free site measure
Ari visits, checks the opening, ground levels, posts and access, and talks through your options.
Written quote
You receive a clear quote that lists what is included, so you know the cost before work begins.
Design and fabrication
Your gate is made to suit your property, including size, material, finish, locking and details.
Site preparation
Posts, footings and, for sliding gates, the track or cantilever setup are prepared so the gate sits true.
Installation
The gate is hung or fitted, adjusted and fixed, with the hardware set to suit how you use it.
Testing and handover
Ari checks the gate opens, closes and latches properly, then walks you through it before he leaves.
Installation usually takes about one day once your gate has been fabricated.
Book Site MeasurePermits, Pool Gate Rules and Standards
Rules for fences and gates in Victoria depend on the type of structure and where it sits. Here are the points that matter most, taken straight from official sources.
Building permits
Merri-bek Council says that, depending on the type of fence you are building, you may need a building permit. It points owners to the Building Regulations 2018 to check which rules apply.
Pool barrier gates
A gate that forms part of a pool barrier must be able to close completely. When closed, it must not be openable by a person who cannot reach its opening mechanism.
Source: Building and Plumbing Commission: Pool and spa inspections and compliance (updated 30 June 2026)
Registration and certificates
Registering a pool or spa with council is mandatory for owners. A new barrier compliance certificate must be lodged every four years.
Source: Building and Plumbing Commission: Pool and spa registration requirements
What we do, and what an inspector does
We build our pool gates to be self-closing and self-latching, and we check the ground gap, latch height and swing direction. The barrier itself is inspected and certified by a registered inspector, so we do not issue compliance certificates.
Every council and property is a little different. Ari will tell you what is likely to apply at the site measure, and you can always double-check with your council.
Gate Repair, Servicing and Maintenance
Not every gate needs replacing. A sagging hinge, a sticking latch or a sliding gate that has drifted off its track can often be fixed. Ari repairs manual, sliding and automated gates.
Sagging or dropping gate
Worn hinges or loose posts make a gate drag on the ground and stop it closing properly.
Sliding gate off its track
Tracks, rollers and guides can drift out of line, so the gate sticks or jumps.
Latch that will not catch
A misaligned or worn latch leaves the gate unsecured. This matters most on pool gates.
Automatic gate problems
Motors, sensors and remotes that stop responding, or a gate that stops part-way.
Gates built for your house, not from a catalogue
Custom Gates Melbourne
I design and install timber, steel, slat, decorative and mixed-material gates for driveways, side entrances, front yards and corner homes. If you want something that matches your fence or façade, I build it that way.
What We Offer for Custom Gates :
Gates designed to match your fence style and property layout
Options in Aluminum, timber, Steel, Colorbond, and premium materials
Custom widths, heights, finishes, and decorative features
Secure locking, latch systems, and optional automation
A durable solution for side access, front entry or estate homes
Why Custom Gates Matter :
A custom gate is ideal when your property needs:
- Better privacy and controlled access
- A personalised entry point that improves street appeal
- Stronger security for family, pets, or vehicles
- A durable solution for side access, front entry or estate homes
Every custom gate is built following Melbourne durability standards, ensuring it withstands local weather and long-term use.
POOL GATES BUILT TO SUIT VICTORIAN REQUIREMENTS
Swimming Gates Melbourne
Safety-first pool gates that self-close and self-latch. I check the gap from ground to gate, latch height and swing direction, so your family stays safe and your inspection goes more smoothly.
Our Pool Gate Services :
Installation of self-closing, self-latching pool gates
Self-closing & self-latching mechanisms
Rust-resistant materials such as aluminium, steel, or reinforced frames
Designs that match pool fencing and landscaping
Replacement of old gates that no longer close properly
What a Pool Gate Must Do: :
A swimming gate must:
- Close automatically from any open position
- Have a compliant latch height
- Prevent footholds and climbable surfaces
We build every pool gate to be self-closing and self-latching. A registered inspector certifies the barrier.
Smooth, Space-Saving Gates for Driveways & Secure Access
Sliding Gates Melbourne
Smooth, space-saving driveway gates installed on tracks or cantilever systems depending on your site. I make sure the slide line is straight, rollers are secure, locks aligned, and the motor space prepared if you want future automation.
Sliding Gate Installation Includes :
Custom-built steel, aluminium, or composite sliding gates
Manual or automatic motorised systems
Tracks, rollers, guides, and safety sensors
Secure locking for vehicles and pedestrian access
Durable frames built for heavy use
Why Choose a Sliding Gate?
Perfect for properties that require:
- Wide driveway access without swinging space
- Strong boundary protection
- Smooth, easy operation
- Modern and clean street-facing aesthetics
- High security for vehicles and equipment
Every sliding gate is designed to suit Melbourne terrain, slope, and weather conditions—ensuring long-term performance.
Why Melbourne Clients Pick
Easy Love Fencing for Gate Installation?
Melbourne-Compliant Gate Installations
Built to Suit Local Rules Text: We build to suit Victorian and council requirements. Ari explains what applies to your property at the free site measure.
Custom Design Options
Every gate is built to suit your fencing, home style, and security needs.
Strong, Durable Materials
We use reinforced, weather-resistant frames and long-lasting components.
Smooth, Hassle-Free Process
Assessment → design → installation → compliance check.
Perfect Fit for All Fencing Types
We integrate gates seamlessly into timber, Colorbond, steel, feature and boundary fences.
Secure Your Property With a Gate That Works Like It Should
FAQ
Frequently Ask Questions
We build our gates to suit Victorian and local council requirements. Rules vary by property, so Ari will tell you what applies at the free site measure.
Absolutely. We design gates that match your style, colour, and materials.
Yes — we offer motorised systems with remotes, sensors, and safety features.
We build pool gates to be self-closing and self-latching, with the right latch height and a non-climbable design. The barrier itself is inspected and certified by a registered inspector, so we check the gap, latch height and swing direction before we finish.
Timber, Colorbond, aluminium, steel, galvanised frames, and decorative or custom-built options.
Most gate installations are completed within 1 day once fabrication is ready.
Yes. We remove old gates and install a new, compliant, secure replacement.
Yes, we service homes, units, estates, warehouses, commercial sites and more.