0411 463 574

Colorbond Fencing Melbourne

Get your free quote

What is Colorbond Fencing?

Colorbond fencing uses corrugated steel panels, pre-painted with durable, weather-resistant coatings. The result is a fence that’s rust-resistant, low maintenance, and long-lasting, making it ideal for Melbourne’s varied climate — from hot summers and UV exposure, to coastal salt air and windy conditions.

As owner-operator at Easy Love Fencing, I (Ari) install each fence myself — ensuring correct alignment, strong footings, and a clean final look.

Planning your budget? Read our guide: Colorbond Fence Cost Melbourne: What Affects the Price?.

Colorbond Fencing Right for You If:

If most of the above apply — Colorbond fencing is a great choice. I’ll help you pick the right specs and install it properly from start to finish.

Colorbond vs Timber

Colorbond or Timber Fencing: Which Is Right for You?

Both are popular across Melbourne, and both have their strengths. Here’s an honest side-by-side so you know what to weigh up before you decide.

 ColorbondTimber
LookClean, modern steel panels in a range of coloursNatural, warm look in lapped & capped or slat styles
PrivacySolid panels, no gaps — strong privacyGood privacy with capped paling or slat
UpkeepLow — occasional hose-down, no paintingNeeds cleaning and resealing or repainting over time
LifespanLong — rust-resistant steel, holds up to weatherLong with good care; depends on upkeep
Termites / rotNot affectedTreated to resist, but timber can be at risk over time
Upfront costHigher upfront, lower lifetime costLower upfront, more upkeep cost over time
Best forBackyards, new estates, corner & exposed blocksFamily homes, a natural look, sloped land
Get Ari’s Recommendation
Why Choose ME

Why Choose Colorbond Fencing?

Long-Term Durability and Low Maintenance

Privacy, Security, and Sound Barrier

Cleaner Look, More Consistent Finish

Ideal for Modern Developments & Estates

Where is Colorbond Fencing Best Used?

Dark grey Colorbond fence along a backyard

Backyard & side boundary fences

Result: Privacy + durability + neat finish

New estates / builder homes

Result: Meets estate requirements and finishes cleanly

Corner blocks or exposed sites

Result:Steel stands up to wind, coastal air, load, and impact

Homes needing low maintenance

Result: No painting, minimal upkeep — ideal for busy households

Properties next to roads or noisy streets

Result: Solid panels reduce noise + provide privacy

Pricing

Colorbond Fencing Cost in Melbourne: What Changes the Price?

No two properties are the same, so I don’t guess a number over the phone. Here’s what affects the price, so you know what to expect before I measure on site.

Length and height

A longer or taller Colorbond fence needs more panels, posts and labour. I measure on site so the quote is based on your actual fence line.

Colour and finish

Standard Colorbond colours and any special or premium shades can change the material cost.

Slope, soil and access

Sloping ground, hard soil or tight access can add time, and may need stepped or raked panels.

Removing the old fence

If an old fence has to come out first, removal and disposal are listed in your quote.

Gates and extras

Adding a matching Colorbond gate or reinforced gate posts changes the materials and the work.

Boundary and approvals

Checking the boundary, talking with neighbours and following estate or council rules can affect the plan.

A written quote before any work starts

As the owner-installer, I measure on site, explain your options and put everything in writing — so you know exactly what’s included before you decide. Free quote. No vague numbers.

Get Free Quote

Want a rough starting figure first? Use the instant estimator below — Colorbond starts from around $120 per metre.

Instant Estimator

Instant Fence Estimator

Get a rough idea of your fencing cost in seconds. Choose your fence type and drag the slider for the length.

Learn more about Colorbond Fencing →
20m
5m100m
Estimated cost
$2,400

Colorbond Fencing · $120/m × 20m

Book Site Measure or call Ari 0411 463 574

This is an initial estimate only. Slope, soil condition, removal of old fences, gates and site access will affect the final formal quote.

Colour Options

Popular Colorbond Fence Colours in Melbourne

Colorbond comes in a wide range of colours, so your fence can match your home, your roof or your estate guidelines. These are some of the most popular fence shades Melbourne homeowners choose. I’ll confirm the colours available for your job when I quote.

Basalt®
Monument®
Woodland Grey®
Windspray®
Shale Grey®
Surfmist®
Dune®
Ironstone®
Jasper®
Pale Eucalypt®
Cottage Green®
Manor Red®
Ask Ari About Colours

Colour swatches shown are a guide only — on-screen colours can differ from the real steel. Ari confirms the exact Colorbond colours available for your job.

Heights & Specs

Colorbond Fence Heights and Specifications

Colorbond can be built to a range of heights to suit your privacy, your yard and any estate or council rules. Here are the common heights and what they’re usually used for. I confirm the right height for your block on site.

HeightCommonly used for
1.2 mFront and lower boundary fences where full height isn’t allowed
1.5 mSide boundaries and gardens needing moderate privacy
2.0 – 2.1 mExtra privacy, busy roads, or where a taller fence is approved
Up to ~3.0 mWith a plinth or lattice/slat topper, where permitted

Panel system

Steel panels slot between steel posts with a bottom rail, giving a solid fence with no gaps and a clean finish on both sides.

Add height with a plinth or topper

A concrete or timber plinth at the base, or a lattice/slat topper on top, can raise the overall height where you need more privacy.

Sloping ground

On a slope the panels can be stepped or raked to follow the ground, so the fence stays straight and neat with no large gaps underneath.

Estate & council limits

Many estates and councils set maximum heights and approved colours. I check your block’s rules before quoting and build to what applies.

Get the Right Height Quoted

Heights shown are a general guide for Melbourne jobs. Permitted heights depend on your estate, council and whether the fence is on a boundary — Ari confirms what’s allowed for your property.

Before You Install

What to Consider Before Installing Colorbond in Melbourne

A few things worth sorting early. I check all of these on site, so nothing gets missed.

Estate or council guidelines

Many Melbourne estates set rules on colour, height and finish. I help you pick compliant options.

Post depth & footings

Posts must be concreted deep enough to resist wind and soil movement. I handle the correct footing myself.

Drainage & ground clearance

On sloped or flood-prone sites, panel clearance and drainage are planned to avoid ground contact.

Gate integration

If you plan gates, decide early — gate posts need extra reinforcement built in from the start.

Longevity expectations

Colorbond lasts decades, but small scratches should be fixed quickly to prevent corrosion.

I check it all on site

You don't have to work this out alone — I run through every point before quoting.

Maintenance

Maintenance & Care for Colorbond Fences

Colorbond is low-maintenance by design. A little care keeps it looking new for years.

Rinse every 6–12 months

Wash panels with a garden hose or low-pressure washer to remove dust, salt or debris.

Inspect for damage

Check for scratches or marks and treat them promptly to prevent rust.

Trim nearby plants

Keep plants and vines off the fence and avoid direct soil contact against the panels.

Check gate hardware

If a gate is attached, check hinges and posts periodically for smooth, stable operation.

My Process

How I Install Your Colorbond Fence

You deal with Ari from the first visit to the final clean-up. Here's exactly what happens.

1

On-site inspection & measure

I check your boundary, slope, soil and estate guidelines before quoting.

2

Materials & panel selection

I discuss panel thickness, Colorbond colours and the right post types.

3

Post footing & setting

Posts are concreted deep, aligned and set to withstand pressure and wind.

4

Panel installation

Panels are fitted neatly with no gaps, keeping height consistent and smooth.

5

Gate or feature integration

I prepare reinforced posts and framing if gates or access points are needed.

6

Final check & clean-up

I check alignment, finish and strength, then remove offcuts and leave it tidy.

7

Handover walk-through

We check the finished fence together so you're happy with fit and finish.

Ready to start?

Book a Site Visit
Excellent
★★★★★

Rated 5.0 based on 5 reviews

Google Reviews

M
Malcolm Risby
Google review
★★★★★

Called Easy Love Fencing as I needed a fence repaired in Richmond. Ari was able to come and fix a new fencepost and did a great job.

S
Sebastian Mantello
Google review
★★★★★

Easy Love does an incredible job and fantastic service.

S
Sam
Google review
★★★★★

I had the pleasure of working with Ari, and I couldn’t be more impressed! From start to finish, Ari was professional, courteous and did excellent work.

N
Norman Hopper
Google review
★★★★★

Great job. Very professional, excellent workmanship and very good price. Highly recommend.

Get Your Free Quote

Ready to Install Colorbond Fencing in Melbourne?

If you're looking for a strong, low-maintenance fence that stays straight and clean for years, I’m here to help. With Easy Love Fencing, you deal directly with me — Ari, the owner and installer — from the first measure to the final screw.
Our Latest Work

From Old Fence to New Colorbond

Real workmanship in Melbourne. Drag the slider to see the difference.

New Colorbond fence by Easy Love Fencing in Melbourne, Australian Metroll steel
Old damaged fence in Melbourne before Colorbond replacement
BeforeAfter
↔
✓ Old fence removed✓ Built straight✓ Clean site handover
Get Free Quote

Have a damaged or worn-out fence? Send Ari a photo and he will tell you what it needs.

Before You Build

Who Pays for a Colorbond Boundary Fence in Victoria?

If your Colorbond fence sits on the boundary, your neighbour is usually part of the decision. Here are the main points from the Victorian Government, so you know where you stand before I quote.

Costs are usually shared

Neighbours generally split the cost of a sufficient dividing fence equally, depending on the circumstances. If one of you wants a higher standard, that person pays the extra.

Give your neighbour a Fencing Notice

A Fencing Notice is a formal proposal to build, repair or replace a fence. Your neighbour has 30 days to respond. If they don't, the work can go ahead without their agreement.

Check the boundary first

A fence should sit in the right place. Ari checks your title plans where available and helps neighbours reach an agreement before work starts.

Estate & council rules

Many estates set colours and heights for Colorbond. Check with your estate or council, and Ari will build to what applies.

What Ari does, and what stays between neighbours: Ari measures the site, explains your options and gives you a clear written quote. Notices and cost sharing are between you and your neighbour — we can't give legal advice. Source: Victorian Government — Fencing in Victoria.
Get Free Quote
FAQ

Colorbond Fencing Melbourne: Frequently Asked Questions

Straight answers to the questions we hear most. Not sure about something? Ask Ari.

Does Colorbond rust in Melbourne's climate?
Not when installed properly. The steel is pre-coated and requires little maintenance — just rinse occasionally and check for scratches.
What height and style is allowed in new estates?
It depends on the estate or council. Ari can check your block's guidelines and help choose the correct height and colour for you.
Can Colorbond handle strong winds or coastal salt air?
Yes — when posts are concreted correctly and panels are installed straight, Colorbond is very stable and resistant.
Do I need to paint or seal Colorbond fencing?
No — the factory coating is enough. Painting or sealing isn't needed.
Can I have gates with Colorbond fences?
Yes. Ari builds matching gates, swing or sliding, with reinforced posts to suit the fence.
Is Colorbond expensive compared to timber?
The initial cost is higher than untreated timber, but the lifetime cost is usually lower thanks to its durability and low upkeep.
How much does Colorbond fencing cost per metre in Melbourne?
As a rough guide, Colorbond starts from around $120 per metre, but the real price depends on length, height, colour, slope, old fence removal and any gates. Ari measures on site and gives a clear written quote — no vague phone numbers.
What colours does Colorbond fencing come in?
Colorbond comes in a wide range of popular colours — darker shades like Basalt, Monument and Woodland Grey for a modern look, or lighter shades like Surfmist and Dune to keep a yard feeling open. Ari confirms the colours available for your job.
How high can a Colorbond fence be?
Most backyard boundaries are built at 1.8m, with 1.5m and 2.0–2.1m also common. With a plinth or lattice/slat topper it can go higher where permitted. The allowed height depends on your estate, council and whether it's a boundary fence — Ari checks that on site.
How long does a Colorbond fence last?
A properly installed Colorbond fence lasts for decades. The steel is rust-resistant with a factory-baked finish, so with just an occasional hose-down it stays looking good for years.
How long does it take to install a Colorbond fence?
Most standard residential jobs are completed in a day or two, depending on the length, the site and whether an old fence has to be removed first. Ari gives you a timeframe with your written quote.
Can you install Colorbond fencing on a sloping block?
Yes. On a slope the panels can be stepped or raked to follow the ground, so the fence stays straight and neat with no large gaps underneath. Ari checks the slope on site before quoting.